Supplies and Vendors
Supplies available for you to purchase in the EMLab, and their links at the vendors we use. For information about the services we provide, click here.
PLEASE NOTE
We strongly encourage you to purchase your own supplies through the vendor links listed here. We do not keep large quantities of these products in stock. (Keep in mind most of these products are sold in bulk from these vendors.)
*Available at the BYU Chemstores stockroom (Benson Building, C184A)
^Our preferred vendor for this product
Supplies
| Vendor | |||
|---|---|---|---|
| Description | Us | EMS Product # | Ted Pella Product # |
| 1 Glass Strip for Knives (6x25x200mm) | $9.00 | - | |
| Glutaraldehyde - 10% EM Grade - 1x10ml Ampule | $8.50 | - | |
| Lift-out TEM grids - Copper (2-post) | $1.00 | - | |
| Lift-out TEM grids - Molybdenum (2-post) | $7.00 | - | |
| * SEM Stub Box - Paper (holds 8 stubs) | $1.20 | - | |
| SEM Stub Box - Plastic (holds 12 stubs) | $4.50 | - | |
| SEM Stub Box - Plastic (holds 4 stubs) | $2.75 | - | |
| SEM Stubs - 1" Aluminum | $3.30 | - | |
| * SEM Stubs - 1/2" Aluminum | $1.00 | ||
| SEM Stubs - 1/2" Carbon | $2.85 | ||
| * SEM Stubs - 45°/90° Low Profile | $4.50 | ||
| * Syringe Filter - 0.2 Micron (Only available at the Chemstores Stockroom) | $2.00 | - | - |
| TEM Grid Storage Box | $7.00 | ||
| TEM Anti-Static FIB Lift-Out Grid Storage Box | $10.00 | - | |
| TEM Support Film on Copper Grid - Formvar stabilized with Carbon 200 Mesh | $2.00 | ||
| TEM Support Film on Copper Grid - Lacey Formvar stabilized with Carbon 400 Mesh | $3.75 | ||
| TEM Support Film on Copper Grid - Ultrathin Carbon Film on a Holey Carbon Support Film 400 Mesh | $8.50 | - | |
| TEM Support Film on Gold Grid - Ultrathin Carbon Film on a Holey Carbon Support Film 400 Mesh | $9.50 | - | |
| Razor Blades (we sell a box of 5 WecPrep blades) | $11.25 | ||
| **Sputtering Target, Gold-Palladium, 57mm diameter | - | - | |
**Go to this list of sputtering targets for options with different materials and thicknesses. CONTACT US before purchasing your own sputtering target to make sure you get one that works with our sputter coater.